Khazzan underground polyethylene water tank, black ribbed moulded tank with vertical neck and base flange
Made in UAE · UAE Municipality Certified · 10-Year Warranty · ISO 9001 / 14001 / 45001

Underground Water Tanks UAE

Khazzan supplies UAE Municipality certified Polyethylene Underground Water Tanks engineered for below-ground installation. Ribbed exterior construction for soil load resistance, smooth food-grade inner liner, manhole access as standard. Available from 365 USG to 2,300 USG. Delivered across all 7 UAE emirates.

365–2,300 USGMade in UAE10-Year WarrantyCarries 2 Cars + SoilCooler Water TempsUAE Municipality Certified

Why Underground Water Storage for UAE?

In UAE's extreme climate, where to put your water tank is as important as what type to buy. Rooftop tanks face direct summer sun - water temperatures can reach 50–55°C, significantly increasing bacterial risk and reducing water quality. Underground tanks solve this completely: buried below ground, the surrounding soil acts as natural insulation, keeping water temperatures substantially lower year-round.

Underground installation also preserves all of your surface space - no tank visible in the garden, no structural load on the roof, no access required for a rooftop plant room. For UAE villas where landscaping, driveways, and outdoor living areas are important, an underground water tank is the most aesthetically and practically efficient storage solution.

Khazzan's underground tanks are purpose-built for burial - with ribbed or corrugated exterior walls engineered to distribute soil pressure, food-grade inner surfaces certified by UAE Municipality, and integrated manhole access for inspection and maintenance without excavation.

🌡️

Cooler Water

Underground soil insulation keeps water significantly cooler than rooftop tanks in UAE summer - improving quality and reducing bacterial risk.

🏡

Zero Visual Impact

Completely hidden below ground. No tank visible in garden, courtyard, or driveway. Full surface space available for landscaping or paving.

☀️

UV Protected

Zero UV exposure underground. No surface degradation, no fading, no impact from UAE's extreme summer solar radiation.

Important: Standard above-ground polyethylene tanks (3-layer, 4-layer, 5-layer) must NEVER be buried underground. They are not engineered for external soil pressure and will deform or collapse. Only purpose-built underground tanks with ribbed/reinforced exterior walls are rated for below-ground installation.

Khazzan underground polyethylene water tank, black moulded one-piece tank with ribbed body and 50 cm vertical neck

Special Features

  • ✓ Corrosion proof
  • ✓ Fungus and bacterial proof
  • ✓ Made from food-grade approved materials
  • ✓ Dubai Municipality approved
  • ✓ Low maintenance and long life
  • ✓ No risk of contamination
  • ✓ Easy to clean and maintenance free
  • ✓ Moulded in one piece with no joints, including a 50 cm vertical neck
  • ✓ Very strong body
  • ✓ Liner load of 3,500 kg/m and total load of 7,500 kg when empty
  • ✓ Can be installed under a car parking area, carrying two cars plus soil on top even when empty, with no supporting chamber or concrete foundation
  • ✓ Warranted for 10 years
  • ✓ Laboratory certificate available
  • ✓ Threaded sealed lid cover

Three-Layer Wall Construction

1. Outer layer: black solid skin

UV-stabilised polyethylene with a food-grade black colour that acts as an additional UV stabiliser.

2. Middle layer: clear polyethylene foam

Provides thermal insulation and improves the stiffness of the tank wall.

3. Inner layer: white solid skin

Works the same way as the outer layer, resists bacterial growth, and keeps the inside of the tank visible.

Cut-away of the three-layer wall of an underground polyethylene water tank: black outer skin, clear foam middle layer, white inner skin

Installation Drawing

Typical installation of an underground polyethylene water tank: a compacted sand bed, sand fill around the tank, a concrete frame supporting a double sealed manhole with a threaded cover, and the water supply, air vent, overflow and pump lines with their valves. The end view and side view show the tank in the excavation below finished floor level.

Installation drawing of an underground polyethylene water tank showing manhole, air vent, water supply line, float valve, overflow pipe, foot valve, compacted sand, end view and side view

Technical Specifications

MaterialVirgin Polyethylene (PE) + UV Stabilizer - food-grade, non-toxic, purpose-built for underground burial
Wall ConstructionRibbed / corrugated exterior for soil load distribution and structural strength
Inner SurfaceSmooth food-grade virgin polyethylene - certified for potable water storage
OriginMade in UAE
Sizes Available365 USG to 2,300 USG (1,380L to 8,706L) - standard stock sizes
Custom SizesContact Khazzan for non-standard sizes and project-specific requirements
Installation DepthTop of tank typically 300–600mm below finished ground level
ConstructionMoulded in one piece with no joints, including a 50 cm vertical neck
Wall Structure3 layers: black UV-stabilised polyethylene outer skin, clear polyethylene foam middle layer, white polyethylene inner skin
Load Capacity (empty tank)Liner load of 3,500 kg/m and total load of 7,500 kg
Vehicle LoadingCan be installed under a car parking area and carry the load of two cars plus the soil on top, even when empty, without a supporting chamber or concrete foundation
LidThreaded sealed lid cover
AccessManhole and inspection access included on all tanks
FittingsInlet, outlet, overflow, vent, and manhole access as standard
Temperature Range-20°C to +60°C
Warranty10 Years
CertificationsDubai Municipality Approved · UAE Municipality Approved · ISO 9001:2015 (Quality) · ISO 14001:2015 (Environmental) · ISO 45001:2018 (Health & Safety) · Laboratory certificate available on request
ApplicationsPotable water · Rainwater harvesting · Irrigation reserve · Fire reserve

Available Sizes

365–2,300 USG (1,380–8,706 Liters)

Need a larger size? Contact Khazzan via WhatsApp on +971509583173 for project-specific requirements.

Benefits of Underground Water Tanks

Strong Enough for Parking Areas

The tank can carry a liner load of 3,500 kg/m and a total load of 7,500 kg when empty. It can be installed under a car parking area and carry the load of two cars plus the soil on top, even when empty, without a supporting chamber or concrete foundation.

Moulded in One Piece

The body, including the 50 cm vertical neck, is moulded in a single piece with no joints, so there are no seams to leak or fail.

Three-Layer Wall

A black UV-stabilised outer skin, a clear polyethylene foam middle layer for thermal insulation and stiffness, and a white inner skin that resists bacterial growth and keeps the inside of the tank visible.

Fungus and Bacterial Proof

The material resists fungus and bacterial growth, so there is no risk of contamination of the stored water.

Threaded Sealed Lid

A threaded, sealed lid cover keeps the tank closed against dust, insects and surface water.

Engineered for Below-Ground Burial

Underground polyethylene tanks are purpose-designed with ribbed or corrugated exterior walls that distribute soil overburden load evenly around the tank - preventing deformation under the pressure of backfilled ground above.

Preserves Surface Space Completely

With the entire tank buried below ground level, the surface above can be used for landscaping, parking, paving, or building access. No visual intrusion, no above-ground footprint. Ideal for UAE villas where garden and courtyard aesthetics matter.

Cooler Water Temperatures

Underground installation insulates stored water from UAE's extreme surface temperatures. While rooftop tanks can reach 55°C+ in summer, underground tanks maintain significantly cooler water temperatures year-round - improving water quality and reducing bacterial risk.

Protected from UAE Weather and UV

Buried underground, the tank is completely protected from UV degradation, extreme solar heat, sandstorms, and physical damage. Above-ground tanks exposed to UAE summer sun degrade over time - underground tanks are shielded from all of these factors.

Food-Grade Inner Surface

The smooth food-grade polyethylene inner surface is UAE Municipality certified for potable water storage. It does not rust, leach, or corrode in contact with stored water - safe for drinking water, irrigation water, and fire reserve storage.

Corrosion-Free Permanently

Polyethylene does not corrode in soil, does not rust, and is not affected by groundwater chemistry. Unlike steel tanks, no internal or external coating is needed. The material holds its integrity in UAE's alkaline and saline soil conditions.

Watertight Construction

Single-piece moulded polyethylene construction with no welded seams or bolted joints in the main tank body. No leakage of stored water into the surrounding soil, and no groundwater gets in.

Lightweight - Easy Installation

Despite their large capacity, underground polyethylene tanks are remarkably lightweight empty. A 1,000 USG tank can typically be handled by a small excavator or manual lifting, without the heavy crane equipment needed for concrete or GRP underground tanks of equivalent size.

Manhole Access for Maintenance

All Khazzan underground tanks include a manhole access port, allowing visual inspection, cleaning, and maintenance without excavation. Regular inspection and cleaning is simple through the manhole without disturbing the surrounding ground.

Fast Installation

Underground polyethylene tanks arrive at site ready to install - no on-site fabrication, concrete pouring, or curing time. Excavate, prepare the sand bed, lower the tank, connect pipework, and backfill. Residential sizes can typically be installed in a single day.

UAE Municipality Certified

All Khazzan underground water tanks carry UAE Municipality certification for potable water storage - the legal requirement for water tanks used in UAE residential and commercial buildings across all seven emirates.

Suitable for Rainwater Harvesting

Underground tanks are the ideal collection vessel for rainwater harvesting systems in UAE. Though annual rainfall is limited, collected rainwater stored underground provides a supplementary supply for garden irrigation, reducing reliance on mains or tanker water.

Applications

Underground water tanks serve wherever below-ground storage, temperature control, or surface space preservation is required:

✔ Residential Villa Water Storage
✔ Garden Irrigation Reserve
✔ Rooftop Tank Supplementary Cistern
✔ Rainwater Harvesting
✔ Fire Fighting Reserve (smaller)
✔ Potable Water Buffer
✔ Apartment Building Ground Reserve
✔ Farm Water Storage
✔ Landscaping Irrigation
✔ Construction Site
✔ Mosque & Community
✔ School Grounds
✔ Remote Villa / Farm
✔ Emergency Water Reserve
✔ Pump Station Sump

Underground vs Above-Ground - Which is Right?

FactorUnderground TankRooftop Tank (Above-Ground)
Water temperature (UAE summer)Much cooler - soil insulation45–55°C in direct sun
Visual impact✔ Zero - completely hiddenVisible on roof or ground
Surface space used✔ NoneRoof or ground footprint
UV exposure✔ ZeroHigh - requires UV stabilisation
Bacterial risk (summer)✔ Lower - cooler waterHigher at 45–55°C
Installation complexityExcavation requiredSimple above-ground placement
Pump required?Yes - to lift water upGravity feed to building (often)
Maintenance accessThrough manhole at gradeRooftop or ground access
Max standard size2,300 USG6,000 USG
Best forVillas, gardens, quality-focused projectsQuickest and simplest installation

Frequently Asked Questions

Everything people ask about underground water tanks in UAE - answered.

Get a Quote Today

Tell us your required capacity, property type, and installation location - we'll confirm the right underground tank and pricing for your project.

Al Qouz Industrial Area 3, Dubai · Mon–Sat 8AM–7PM